How to Install Wooden Dummy onto Mobile Frame

Instructions for Installing Wooden Dummy onto Mobile Frame
How to instal Mook Jong
CONTENTS OF ORDER

MOBILE ADJUSTABLE FRAME
1. (2) Frame Posts
2. (4) Mounting Brackets
3. (2) Cross Bars
4. (2) Leg support
5. (4) Gusset leg support plates
6. (20) Bolts
7. (12) Washers
8. (12) Locking Nuts
9. (4) Castors-Locking Wheels (optional)
10.(4) Mini-screws for Castors (optional)

WOODEN DUMMY
1. (1) Modern Wooden Dummy Base
2. (3) Standard Arms
3. (1) Standard Leg
4. (4) Carabineer Locks for Arms or Legs
5. (3) 5” Wooden Locking Pegs for Standard Arms
6. (1) 7” Wooden Locking Pegs for Standard Legs

 

 

STEP 1: INSTALL FRAME POSTS
Parts Needed for this step:
1. (2) Gussets leg support plates
2. (1) Frame Post
3. (8) Bolts
4. (8) Washers
5. (8) Nuts
6. (1) Leg support


To install the frame post you need to first insert (8) bolts and (8) washers into the gusset leg support plate. Then align the post to the set of the bolts and insert the leg supports. Align (1) Gusset leg support plate on top and put in place. Finish off with (8) nuts. Repeat the process with the other Frame Post.

 



STEP 2: BOLT CROSS BARS

Parts Needed for this step:
1. (2) Cross bars

The adjustment is based on your height. Top bracket is for 6’4 or taller. Lowest
Bracket is for 5’4 in height. Choose the height of the dummy first. Once you have
chosen the height insert (1) bolt, (1) washer and (1) cross bar onto the dummy
frame that you just built. Align the bottom Bracket to the same number as on the top
bracket and repeat the process.

STEP 3: INSTALLING THE DUMMY

Parts Needed for this step:
1. (1) Modern Wooden Dummy Base

Stand up the structure you had just built. With one completed frame post and two
cross bars attached. Slide in the Wooden Dummy Base. Take the second Frame Post
and bolt in the other side with the same process above.

STEP 4: INSERT ARMS AND LEGS

Parts Needed for this step:
1. (3) Arms
2. (1) Leg
3. (3) 5” Wooden Locking Pegs for Standard Arms
4. (1) 7” Wooden Locking Pegs for Standard Legs
5. (4) Carabineer Locks for Arms or Legs

Insert the arms onto the top two and center square holes and slide in the 5” Wooden
Locking Pegs for the Standard Arms. Lock it in place with 1 Carabineer Lock each.
Insert the Standard Leg on the bottom angle hole. Insert the 7” Wooden Locking Peg
for standard legs. Lock it in place with (1) Carabineer Lock.

STEP 5: WAX PASTE (OPTIONAL)

For smooth slide across the cross bars, you can rub wax paste on top of the cross
bars. i.e. (Johnson’s Wax Paste – yellow can) You can find this product at any home
improvement store.